Tengri Ground Control - controlling Viewpro Z10 Gimbal/Camera system

Controlling integrated gimbal / camera systems directly via Mavlink without an RC transmitter is still quite difficult to configure and setup on Ardupilot and PX4.

With Tengri Ground Control, this is now an easy process. Connect the PWM ports from the Gimbal / Camera system to the AUX ports on the flight controller and then assign the custom PAN, Tilt, and Zoom commands on the Tengri Ground Control unit to those AUX ports.

Below is a demonstration of the Viewpro Z10 Gimbal / Camera being controlled via a Tengri Ground Control station using only a SiK radio (No RC transmitter required).